How to clean the Can filling and sealing combination machine？- Zhejiang Bowei Food Machinery Co., Ltd.

How to clean the Can filling and sealing combination machine？

Posted by Admin

Cleaning the can filling and sealing combination machine involves several steps to ensure proper hygiene and maintenance. Here's a general guide on how to clean the machine:

Preparation: Before starting the cleaning process, ensure that the machine is turned off and disconnected from the power source. Review the machine's manual or consult the manufacturer for any specific instructions or cleaning agents recommended for your particular model.

Disassembly: Remove any removable parts or components that can be detached for cleaning. This may include the filling nozzles, sealing heads, conveyor belts, or any other parts specified in the manual.

Manual Cleaning: Clean the detached parts using appropriate cleaning agents, such as warm soapy water or specialized cleaning solutions recommended for food processing equipment. Use brushes, cloths, or scrubbers to remove any residue, deposits, or contaminants from the surfaces thoroughly.

Rinse and Sanitize: After cleaning, rinse the parts with clean water to remove any cleaning agents or soap residue. Ensure that all surfaces are rinsed thoroughly. To ensure proper sanitation, you may use a food-grade sanitizer approved for use in your industry. Follow the instructions for the sanitizer, including contact time and dilution ratios, if applicable.

Clean the Machine Body: Wipe down the exterior surfaces of the machine, including the frame, control panel, and any exposed areas, with a clean cloth dampened with a mild cleaning solution. Take care to avoid getting any liquid into electrical components.

Reassembly: Once all the cleaned parts are completely dry, reassemble the machine according to the manufacturer's instructions. Ensure that all components are properly aligned and securely attached.

Lubrication: If specified by the manufacturer, apply food-grade lubricant to the designated parts, such as bearings or moving components, according to the recommended intervals and quantities.

Inspection: Conduct a thorough visual inspection of the machine to ensure that all parts are clean, properly reassembled, and in good condition. Check for any signs of wear, damage, or loose connections that may require maintenance or replacement.

Run a Test Cycle: Before using the machine for production, run a test cycle without product to ensure that it operates smoothly and that all parts are functioning correctly. Monitor the machine for any unusual sounds, vibrations, or issues during the test run.